|
U.S. SURFACE PROTECTION
1900 Skinner Court
New Bern, NC 28560
1.866.818.9706
www.ussurfaceprotection.com
JUNE 2005
Protectapeel: 785-1 TECHNICAL DATA SHEET
Download this technical sheet in PDF format.
Protectapeel: 785-1 is a weather resistant strippable protective coating, designed to provide protection for a number of substrates which can be stored externally for periods up 12 months. The product is specially formulated to provide good early onset water resistance and good UV ageing properties.
| TYPE: |
| |
Water dispersion (neutral) |
| |
| COLOR: |
| |
Blue or other colors by request |
| |
| USE: |
| |
Strippable coating for masking and protecting metals, stoved paints, glass, glass reinforced fibre moulds and components. DO NOT USE on acrylic surfaces. For all other surfaces, please contact the technical department of Spraylat International. |
| |
| TOXICITY: |
| |
The compound is non-toxic and non-flammable in the wet state. |
| |
| APPLICATION: |
| |
Apply by SPRAY or LAMBSWOOL ROLLER. Apply generously to achieve a minimum dry film thickness of
4mm. Airless sprayer using 17 Thou tip size and 2 box coats. |
| |
| DRYING TIME: |
| |
A dry film thickness of 4mm will be tack free in approximately 2
hours at room temperature. |
| |
| NON_VOLATILES: |
| |
45% |
| |
| REMOVAL: |
| |
The dry film can be easily removed either by hand stripping or by pressure hose. |
| |
| COVERAGE: |
| |
One gallon will cover about 100+ sq. ft. at a film thickness of 4mm.
Thicker coatings of 6mm are recommended for floor
coverings and outdoor protection.
|
| |
|
| |
GENERAL NOTE: It is important that this product is thoroughly evaluated under production conditions before being commercially adopted (Such an evaluation should incorporate a reference to ageing). The above recommendations are made in good faith for the guidance of users and are without liability. Any queries should be referred to our Technical Sales Department. |
|
